OT endpoint protection

We deploy protection on old, unpatchable, or internet-isolated HMIs, engineering workstations, and industrial PCs without slowing down operations. No prior assessment is needed to get started.

Plant machines

Why office antivirus is not enough here

An office endpoint protection agent often cannot be installed on plant machines, or operations will not allow it, and that caution is justified. We cover the differences in detail in our article on OT endpoint protection.

  1. Old operating systems

    Many HMIs and engineering workstations run an old version of Windows, sometimes XP, because the control software is certified only for that version. Modern EDR agents either do not run on these machines or are not supported there.

  2. Limited resources

    An industrial panel PC has little memory. An agent that scans all the time uses up the very headroom the control application needs, and here any delay affects production.

  3. No internet connection

    In principle, a segmented OT network has no route out to the internet, so protection that depends on daily signature updates never receives them.

  4. A false positive means downtime

    When EDR quarantines a file by mistake in the office, someone gets annoyed. When the same happens to a component of a control application, production stops.

Allowlisting

Only what is on the list runs

We deploy industrial endpoint protection in allowlisting mode: we record what is allowed to run on the machine, and everything else is blocked by default. We use TXOne Networks tools for this. The Stellar product family, which handles modern and legacy systems separately, is built for allowlisting protection.

CriterionTraditional antivirusAllowlisting
Core questionIs this file malicious?Is it on the list of what may run?
UpdatesNeeds a constantly updated knowledge baseWorks without daily updates
Unknown malwareCan get through until the knowledge base recognizes itCannot start, so it also protects against zero-day attacks
Where it fitsMachines whose software changes oftenPlant machines whose software stays the same for months, often for years
Traditional antivirus and allowlisting

Rollout

From learning to blocking

An allowlist cannot be put together on paper. That is why the protection starts blocking only once the list reflects how the machine actually runs.

  1. Inventory

    We take stock of the HMIs, engineering workstations, and industrial PCs to be protected.

  2. Learning mode

    Once installed, the protection only observes at first and collects what actually runs on the machine. If a spare machine with the same configuration is available, we try the installation on it first.

  3. Enforcement

    We review the collected list and only then switch to enforcement mode. We consult you before the switchover, with a rollback plan in place.

  4. Handover

    We hand over documentation of the deployment and of the allowlist for each machine.

Deliverables

What you get at the end

items handed over

  • Inventory of the assets to be protected
  • Deployment of industrial endpoint protection with allowlisting
  • Handover documentation

Related services

Beyond the machines

Endpoint protection secures individual machines. The services below cover a picture of the network, the media brought into the plant, and ongoing maintenance of the protection.

  1. OT security assessment

    Shows what is on the OT network and what talks to what. The full-depth version also analyzes legacy systems that cannot be updated.

  2. Media inspection station

    USB drives, laptops, and files brought into the plant are checked before they get in. On isolated networks, USB media is one of the most common infection routes.

  3. Portable scanning (TXOne Portable Inspector)

    Some machines cannot have anything installed on them. In that case an engineer plugs in a USB device, runs the scan, and takes it to the next machine. Nothing is installed on the machine, and no running process is left behind.

  4. OT protection platform maintenance

    Keeps the deployed OT protection tools up to date after handover, including adding new OT devices.

Frequently asked questions

The questions we hear most

Do I need an OT security assessment first?

No. If you need a picture of the entire OT network beyond the machines being protected, the OT security assessment provides it.

What will the equipment manufacturer say?

This needs to be settled before installation. For a lot of equipment, the supplier explicitly prohibits installing third-party software, and doing so voids the warranty or certification. Many manufacturers, however, now support and even recommend OT-specific security tools.

What happens if the supplier updates the control software?

Then the allowlist has to be updated too, so this should be part of change management. It is also worth recording who approves new items and what happens if something gets blocked during the night shift. Maintenance can be handled by your own team, or we can take it on as part of OT protection platform maintenance, under a custom agreement and within a scope agreed with you. Maintenance does not include alert monitoring.

Contact

Ready to secure your critical systems?

Our experts will assess where your security stands and build a roadmap that fits your organization.

ARLITECH's office in Gödöllő

Visit us

You are welcome to visit our Gödöllő office in person.

Address
Centrum Office Building, 2100 Gödöllő, Dózsa György út 13, 3rd floor, office 309
Office hours
Mon–Fri, 9 a.m. to 5 p.m.
Get directions (opens in a new tab)